54
Caller ID operation
Reviewing the call history and
returning calls
To review the call history
Use the following steps to review the call history.
1. Press
[CALL HISTORY]. The screen displays
CALL HISTORY and the number of total calls
and new calls in the call history.
-OR-
Press
[ ] or [ ] when the telephone is idle to
show the most recent caller ID entry directly.
Skip to step 3.
2. Press
[ ] to show the most recent call. The call
history displays the caller ID entries in reverse
chronological order (i.e., the most recent one
first).
3. Press
[ ] or [ ] to scroll through the caller ID
entries.
4. Press
[CALL HISTORY] to exit call history mode.
To return a call (display dial)
As you review call history records, you can dial an
entry's phone number.
1. Press
[CALL HISTORY] to enter call history.
2. Press [ ] or [ ] until you see the desired caller
ID entry.
3. Press [ENTER]. The screen displays DIAL or DIAL
ALTERNATE.
4. Press [ENTER].
The phone automatically selects an idle line and
dials the call unless you choose a specific line
to dial the call by pressing the [LINE] button, the
call is then dialed in the mode (speakerphone
or headset) you programmed (see AUTOMATIC
MODE on page 39 of the installation guide).
10:21AM 11/23 L4
Jeffrey Adams
5559876
CL#199 NEW
10:11AM 11/23 L1
Chris Thompson
5550100
CL#198 NEW
CALL HISTORY
200 CALLS
050 NEW
10:31AM 11/23 L1
Pat Williams
18095551234
CL#200 NEW
10:11AM 11/23 L1
Chris Thompson
5550100
DIAL
NOTE: While review-
ing the numbers in call
history, if you want to
place a new call to a
number other than the
displayed number, you
need to press and hold
[ENTER] or wait for 30
seconds to return to
idle.
To Next Page
Loading...
