AT&T 1080 User Manual

74
Answering system operation
Private message playback
Options during message playback
• To adjust the playback volume, press
[ VOLUME].
• To skip to the next message, press
[ ].
• To go back to the previous message, press
[ ] within three seconds of the start of the
message playing. To repeat the message
currently playing, press [ ] after three seconds
of the start of the message playing.
• To pause playback (up to 30 seconds), press
[ENTER], and press again to resume.
• To delete the message currently being played
back, press [REMOVE].
• To stop playback and exit the
DTAD FEATURE
menu, press [DTAD].
-OR-
Wait until playback is over or press [ENTER]
to pause playback. Press [ ] to highlight EXIT
MSG PLAY and then press [ENTER]. Press [ ]
to move to the next feature.
To delete all private messages
1. Press
[DTAD] while the telephone is idle (not
during a call or during message playback).
2. Press
[ ] or [ ] until you see PRIVATE MSGS.
Press [ENTER].
3. Press
[ ] or [ ] until you see REMOVE ALL
MSGS. Press [ENTER].
4. The screen displays REMOVE ALL? Press
[DTAD] to exit the DTAD FEATURE menu and
leave all messages intact.
-OR-
Press
[ENTER] within three seconds to delete all
messages. Press [ ] to see the next PRIVATE
MSGS or press [DTAD] to exit the DTAD
FEATURE menu.
PRIVATE MSGS
20 MESSAGES
REMOVE ALL MSGS
PLAY ALL MSGS
MESSAGE #03
PAUSE
PRIVATE MSGS
20 MESSAGES
REMOVE ALL?

AT&T 1080 Specifications

General

Brand	AT&T
Model	1080
Category	Telephone
Language	English