36
One-touch setup and operation
One-touch storage
Use the following steps to program the one-touch
keys.
1. Press [ENTER]. The screen displays ONE TOUCH.
2. Press [ENTER].
3. Press
[ ] or [ ] repeatedly until you see
PROGRAM.
4. Press
[ENTER]. The screen includes (ENTER
NUMBER).
5. Use the dial pad to enter up to 24 digits.
-OR-
•
To copy the most recently dialed number
from redial, press [(AUTO) REDIAL]. You can
copy only the last number dialed from this
extension to a one-touch location. You cannot
copy the other numbers in the redial shack.
•
If you need to store a two-second dialing
pause for accessing banking or long distance
services, press [ ] or [ ], scroll to PAUSE,
then press [ENTER]. A P appears on the
screen.
•
If you need to store a signal for switching
to temporary tone dialing, press [ ] or [ ]
until you see TONE, then press [ENTER]. A T
appears on the screen.
•
If you need to store a flash signal for using
the service supplied by your telephone
company, press [ ] or [ ] until you see
FLASH, then press [ENTER]. An F appears on
the screen.
•
To erase the last digit, press [ ] to scroll to
DELETE CHAR, then press [ENTER].
-OR-
Press
[REMOVE].
•
To cancel programming, scroll to CANCEL
and then press [ENTER].
Continued on next page
PROGRAM
(ENTER NUMBER)
PAUSE
To Next Page
Loading...
