58
COVM RESET
Use the Central Office Voice Mail Reset feature
when the phone display and NEW CALL light
indicate there is voice mail when you have none.
You might have accessed your voice mail from
a remote location (while away from the phone).
You might have received a false signal from your
local service provider. You can clear the indicator
manually.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see SPECIAL OPTIONS.
Press [ENTER].
3. Press
[ ] or [ ] until you see COVM RESET.
Press [ENTER].
4. Press
[ ] or [ ] to scroll through the COVM
RESET menu (L1 COVM RESET - L4 COVM
RESET, or ALL COVM RESET).
5. When the indicator of the phone line you want
to reset displays, press [ENTER] to remove the
message waiting indicator. You can clear all the
lines at the same time by choosing ALL COVM
RESET. The screen includes RESET!
6.
To move to the next line, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
This turns off the display indicator and the flashing
of the NEW CALL light; it does not delete your
voice mail message(s). If there actually is a new
voice mail message, your local telephone company
resends the signal causing the NEW CALL light to
flash and the digit for the line to appear on the
screen.
COVM RESET
L1 COVM RESET
10:01AM 11/23
EXT 11
CID:50/200 COVM
DTAD:16/20 1234
To Next Page
Loading...
