95
Multiple handset use
Call transfer using intercom
Using the telephone base:
1. When on an outside call, press OPTION .
2. Press SELECT to choose Intercom. The call is automatically put on hold.
X The telephone base displays INTERCOM TO:. Use the dialing keys to
enter a specic handset number (1-9 for handsets 1-9, TONE followed
by 0-2 for handsets 10-12, # for a single cordless headset/speakerphone,
and # followed by 1 or 2 for cordless headset/speakerphone 1 or
cordless headset/speakerphone 2, respectively), or press CID, DIR,
/RECORD, or /DELETE to select a destination handset, and then
press SELECT .
The call is automatically put on hold. Your telephone base screen displays
Calling HANDSET X. The destination device rings and displays BASE is calling.
3. To answer the intercom call on any destination handset, press ANSWER ,
LINE 1/FLASH, LINE 2/FLASH, /SPEAKER, A CELL, B CELL or any dialing
key (0-9 or TONE ) on the destination handset. Both handsets and the
telephone base show Intercom and the outside call is still on hold.
X To answer the intercom call with the cordless headset, press on the
headset.
4. From this intercom call, you have the following options:
X You can transfer the call. Press OPTION , and then
press SELECT to select Transfer on the telephone
base. Your screen shows Call transferred. The other
handset automatically connects to the outside call.
X You can let the other device join you on the outside call in a 3-way
conversation. Press OPTION , and then CID, DIR, /RECORD, or
/DELETE to highlight Share call, and press SELECT .
X You can end the intercom call and continue the outside call with your
telephone base. Press CANCEL, END, 1 LINE, 2 LINE, SPEAKER ,
CELL A , or CELL B on the telephone base. The destination device
screen shows Intercom ended.
NOTES:
X If you want to cancel an intercom call and reconnect to the outside call before the destination
handset answers, press CANCEL or END on the telephone base.
X If the called device does not answer within 100 seconds, or it is in use, on a call, or out of range,
the initiating device shows No answer. Try again. and returns to the outside call.
Transfer
Share call
p
q
SELECT
BACK
To Next Page
Loading...
