AT&T TL87203 - Options During Playback

136
Answering system
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause or delete the message.
When messages are playing on the telephone base:
X Press /VOLUME/ to adjust the speaker volume.
X Press /SKIP or SKIP to skip to the next message.
X Press /REPEAT or REPEAT to repeat the message currently playing.
X Press /REPEAT or REPEAT twice to listen to the previous message.
X Press /DELETE to delete the current message. The system advances to
the next message.
X Press 2 to pause the playback and show the caller ID information.
X Press 1 LINE, 2 LINE, SPEAKER , or DIAL to use line 1 or line 2,
or press Cell A or CELL B to use a cell line to call back the caller. If
necessary, press QUIET
#
(pound key) or 1 to show dierent
dialing options.
X Press CANCEL or BACK to restart the playback. If you do not call back
within 10 seconds, message playback restarts.
X Press 1 LINE, 2 LINE, CELL A , or CELL B to pause the message
playback. The telephone base screen displays Call back? with the caller
ID information. Press DIAL to call back the caller, or BACK to restart the
message playback. If the dialing format used is not correct, and then use
the option, as mentioned above, to choose the correct format before
calling back the caller.
X Press /LINE 1 MAIL BOX, /LINE 2 MAIL BOX, or CANCEL to stop
the playback.