96
Multiple handset use
Push-to-talk (PTT)
You can directly broadcast messages from one
handset or telephone base to the speakerphone of
one or a group of other devices. Press and hold
PUSH TO TALK on a handset or PTT on the telephone
base to begin a two-way communication.
X Only one device can talk at a time. While talking to
another device, press and hold PUSH TO TALK on
the handset or PTT on the telephone base.
X You must release PUSH TO TALK on the handset or PTT on the telephone
base, so the other person can respond.
X Only one PTT session can be active at a time.
X While PTT is in use between two devices, other devices cannot use the
intercom feature but can access the answering system.
X When you attempt to place a PTT call to another device which is accessing
the answering system or on an intercom call or outside call, your device
screen shows Not available at this time.
NOTE: The PTT function is not available when QUIET mode is on.
Turn PTT on or o
Using a cordless handset:
1. Press PUSH TO TALK when the handset is not in use. The
PUSH TO TALK menu displays.
2. Press CID or DIR to highlight PTT On/O, and then
press SELECT .
3. Press CID or DIR to choose On or O, and then
press SELECT .
Using the telephone base:
1. Press PTT when the telephone base is not in use. The
PUSH TO TALK menu displays.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight PTT On/O, and then press SELECT .
3. Press CID, DIR, /RECORD, or /DELETE to
choose On or O, and then press SELECT .
NOTE: The handset or the telephone base screen displays PTT
when PTT is turned off.
/
PUSH TO TALK
BASE
PTT On/Off
BACK
SELECT
INC OMING PTT
On
Off
BACK
SELECT
INCOMING PTT
On
Off
BACK SELECT
PUSH TO TALK
HANDSET 1
PTT On/Off
p
q
SELECT
BACK
p
q
SELECT
BACK
To Next Page
Loading...
