AT&T TL87203 - Dial, Edit, or Delete a Directory Entry; Dial a Directory Entry; Edit a Directory Entry

111
Directory
Dial, edit, or delete a directory entry
Dial a directory entry
You can dial a directory entry on any line.
To dial a directory entry:
Using a cordless handset:
1. Search for the desired entry in the directory (see Review directory entries
and 3-character alphabetical search on pages 108-110).
2. When the desired entry appears, press # (pound key) repeatedly to show
dierent dialing options.
3. When the displayed number is in the correct format, press LINE 1/FLASH,
LINE 2/FLASH, or /SPEAKER to dial using line 1 or line 2. Press CELL A or
CELL B to dial using the cell line.
Using the telephone base:
1. Search for the desired entry in the directory (see Review directory entries
and 3-character alphabetical search on pages 108-110).
2. When the desired entry appears, press # (pound key) repeatedly to show
dierent dialing options.
3. When the displayed number is in the correct format, press 1 LINE, 2 LINE,
SPEAKER , or li the corded handset, to dial using line 1 or line 2. Press
CELL A or CELL B on the telephone base to dial using the cell line.
Edit a directory entry
You can edit any directory entry. However, be aware that if you download a
directory from a cell phone again, the directory is erased and replaced with
the current cell phone directory. If you have edited the downloaded entries on
your TL87203, those changes are lost. To avoid losing changes made to the
downloaded directory, we suggest that you edit numbers in your cell phone,
and then download the directory.
Using a cordless handset:
1. Search for the desired entry in the directory (see Review directory entries
and 3-character alphabetical search on pages 108-110).
2. When a directory entry displays, press EDIT . The screen shows EDIT
NUMBER along with the phone number to be edited.
3. Use the dialing keys to edit the number:
X Press CID or DIR to move the cursor to the le or right.
X Press MUTE/DELETE or BACKSP to erase a digit.
X Press and hold MUTE/DELETE to erase all digits.
X Press and hold REDIAL/PAUSE to add a dialing pause (a p appears).
4. Press NEXT .