AT&T TL87203 - Dial Mode; Line Preference

63
Telephone settings
Cordless handset and telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
Using the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Settings, and then press SELECT .
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Dial mode, and then press SELECT .
4. Press CID, DIR, /RECORD, or /DELETE to choose
Touch-tone or Pulse, and then press SELECT . The
screen displays Dial mode is touch-tone or Dial mode
is pulse. You hear a conrmation tone and the screen
returns to the previous menu.
Line preference
The line preference setting determines the default line for the corded handset,
and the speakerphones on a cordless handset or the telephone base, for
outgoing calls. You can select Auto, Line 1, or Line 2 for your call.
Using the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to highlight
Settings, and then press SELECT .
3. Press CID, DIR, /RECORD, or /DELETE to highlight
Line preference, and then press SELECT .
4. Press CID, DIR, /RECORD, or /DELETE to highlight
Auto, Line 1, or Line 2, and then press SELECT to save.
You hear a conrmation tone and the screen returns to
the previous menu.
NOTE: If both line 1 and line 2 are in use or on hold, the telephone system will take line 1
automatically when you use the corded handset, or the speakerphone on a cordless handset
or the telephone base.
SETTINGS
Key tone
CID time sync
Dial mode
p
q
SELECT
BACK
DIAL MODE
Touch-tone
Pulse
p
q
SELECT
BACK
p
q
SELECT
BACK
LINE PREFERENCE
Auto
Line 1
Line 2
p
q
SELECT
BACK
SETTINGS
LCD language
Line preference
Voicemail #