AT&T TL87203 - Page 69

62
Telephone settings
CELL AREA CODE
---
SAVE
BACKSP
Cordless handset and telephone base settings
Using the telephone base:
1. Press MENU in idle mode to enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Directory, and then press SELECT .
3. Press CID, DIR, /RECORD, or /DELETE to
highlight a desired downloaded directory, and then
press OPTION .
4. Press CID, DIR, /RECORD, or /DELETE to highlight Cell area code,
and then press SELECT . The screen briey shows Only for 7 digits dialing
from Caller ID log.
5. Use the dialing keys to enter a three-digit home area code.
X Press /DELETE or BACKSP to erase a digit.
X Press and hold /DELETE to erase all digits.
X Press CID or /REPEAT to move the cursor to the le. Press DIR or
/SKIP to move the cursor to the right.
6. Press SAVE to conrm. You hear a conrmation tone and the screen shows
Area code will not be shown in Caller ID log briey before returning to the
previous menu.