37
Bluetooth
Bluetooth setup
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must rst pair and connect your Bluetooth cellular phone or headset with the
telephone base. The TL87203 can be used to make or answer calls on the cell
phone line.
Bluetooth wireless technology operates within a short range (up to 30 feet).
When you pair a Bluetooth cell phone or Bluetooth headset to the
telephone base, keep the device within 15 feet of the telephone base for
optimal performance.
Add a cell phone
Before you begin, make sure that you have cellular coverage and your
Bluetooth enabled cell phone is not connected to any other Bluetooth device.
Refer to your cell phone user's manual to learn how to search for or add new
Bluetooth devices.
To pair and connect a cell phone:
Using the telephone base:
1. Press MENU on the telephone base in idle mode to enter
the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to highlight
Bluetooth, and then press SELECT .
3. Press SELECT to choose Add device.
4. Press SELECT to choose Add cellular. The screen
displays Please wait..., followed by 1. If cell is connected
to BT device, please disconnect it. The
cell device lights (CELL A and CELL B/HEADSET )
on the telephone base ash, alternately.
X If there are already 4 paired devices on the device list,
the 4th one on the list will be automatically removed,
regardless of whether the pairing of the new device is
successful or not.
X If there are already 2 active devices on the device list
with prex A: or B:, the telephone base shows Cell
phone A is deactivated for adding a new device.
5. Press NEXT . The screen displays 2. Place cell phone next
to base.
X All devices that are connected to the telephone base are disconnected
until the pairing process completes.
6. Press NEXT to turn on the telephone base discoverable mode. The screen
displays Set cell to search base: AT&T DECT 6.0 PIN: 0000. Promptly turn on
the Bluetooth feature of your cell phone and search for or add new devices.
ADD DEVICE
Add cellular
Add headset
BACK SELECT
Caller ID log
Intercom
Page all devices
Bluetooth
BACK SELECT
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
Set cell to
search base:
AT&T DECT 6.0
discoverable
PIN:0000
To Next Page
Loading...
