AT&T TL87203 - Answer a PTT Call

100
Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
Using a handset or the telephone base:
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
X PTT From HANDSET X To device(s): X (the rst X represents the
initiating handset number, and the second X represents your handset
number; a maximum of four handset numbers appear).
-OR-
X PTT From BASE 0 To device(s): X (the X represents your handset
number; a maximum of four handset numbers appear).
3. When your speakerphone light is o (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or PTT on
your telephone base. You will hear a chirp. Speak towards the device.
X While you are speaking, your device shows PTT To Handset: X
(X represents the handset numbers of one or more destination
handsets; a maximum of four handset numbers appear) or
PTT To device(s): X (X represents the devices numbers of one or
more destination handsets; a maximum of four recipient device
numbers appear).
X Your voice is broadcast to all destination devices.
Aer speaking, release PUSH TO TALK on your handset or PTT on your
telephone base. Your device will beep. Aer the beep, if your speakerphone
light is o, you can press and hold PUSH TO TALK on your handset or PTT
on your telephone base to continue speaking, or the destination device
can respond.