AT&T TL87203 - Conference Calls; Conference Calls on Line 1 and Line 2

77
Telephone operation
Conference calls
Conference calls on line 1 and line 2
When you have calls established on line 1 and line 2, either in use or on hold, you
can conference line 1 and line 2 using a handset, headset or the telephone base.
To conference both line 1 and line 2:
Using a cordless handset:
1. Press OPTION .
2. Press CID or DIR to highlight Conference.
3. Press SELECT . The conferencing devices’ screen display Lines now in
conference, followed by Conf.
Using the telephone base:
1. Press OPTION .
2. Press CID, DIR, /RECORD, or /DELETE to highlight Conference.
3. Press SELECT . The conferencing devices’ screen display Lines now in
conference, followed by Conf.
Using a cordless headset:
X Press on the headset at any time to join the call.
To select an option while on a conference call:
Using a cordless handset:
1. Press OPTION .
2. Press CID or DIR to highlight one of the following options:
X End Line 1
X End Line 2
X Equalizer
X Caller ID log
X Directory
3. Press SELECT .
Using the telephone base:
1. Press OPTION .
2. Press CID, DIR, /RECORD, or /DELETE to highlight one of the
following options:
X End Line 1
X End Line 2
X Equalizer
X Caller ID log
X Directory
3. Press SELECT .