AT&T TL87203 - Change PIN; Cell Ringer

47
Bluetooth
Bluetooth setup
Change PIN
You may be required to enter a PIN when establishing a Bluetooth connection.
The default PIN of your telephone base is 0000.
To change the PIN:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Bluetooth, and then press SELECT .
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Change PIN, and then press SELECT .
The telephone base displays ENTER NEW PIN and
the existing PIN.
4. Use the dialing keys to enter a new 4-digit code.
X Press /DELETE to erase a digit.
X Press and hold /DELETE to erase all digits.
X Press CID or /REPEAT to move the cursor to the le. Press DIR or
/SKIP to move the cursor to the right.
5. Press SET to save.
Cell ringer
If this feature is on and you have connected an iPhone device (iOS 4.1 or later)
to your telephone system, the telephone plays your iPhone ringtone when
there is an incoming call.
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to
highlight Bluetooth, and then press SELECT .
3. Press CID, DIR, /RECORD, or /DELETE to
highlight Cell ringer, and then press SELECT .
X If there is more than one paired device on the device
list, press CID, DIR, /RECORD, or /DELETE to
highlight the desired device, and then press SELECT .
4. Press CID, DIR, /RECORD, or /DELETE to choose On or O, and then
press SET .
NOTE: The quality of ringtone played on your telephone is subject to individual
ringtone characteristics.
CELL RINGER
On
Off
BACK SET
BLUETOOTH
Download dir
Change PIN
Cell ringer
BACK SELECT
ENTER NEW PIN
0000
BACK SET
BLUETOOTH
Device list
Download dir
Chan
g
e PIN
BACK SELECT