AT&T TL87203 - Computer Connectivity and Options

19
Getting started
Plug the large end
of the USB cable
into a USB port on
your computer.
Connect your telephone base to computer
Your new AT&T TL87203 allows you to make and receive sophone calls by
connecting the telephone base to your computer by using the USB cable
provided in the package. You can manage sophone Voice over IP (VoIP) calls
through Skype
®
or Microso Lync
®
, landline calls, or cell calls by using the AT&T
Softphone Call Manager. You can also use the voice command feature to make
calls (see page 60) after you have installed the AT&T Softphone Call Manager.
For more details about the software, refer to the English or French Installation
and Operation Guide, available in the CD-ROM which comes with the package.
Compatibility
The AT&T Softphone Call Manager works with:
Operating systems Software programs and versions
Microsoft
®
Windows XP
®
,
Windows Vista
®
, Windows 7,
Windows 8
Skype
®
5.0 or above, Windows Media Player
®
10 or above, Microso Outlook
®
2003 or
above, Microso Lync
®
2010/2013, iTunes
®
10
or above, Landline calls controllers
To connect the telephone base to your computer:
X Plug the USB cable into your computer, as shown below. Wait for your computer to recognize
your AT&T TL87203.
Plug the small end of the USB cable
into the micro USB port on the right
side of the telephone base.