149
Appendix
One long beep The headset is ready to take your voice command. (You have to
install the AT&T Sophone Call Manager before using this feature.
For installation and operation instructions of the soware, refer to
the Installation and Operation Guide which can be found in the
CD-ROM in the package. You may also visit
www.telephones.att.com/downloads to download it.)
One short beep every
30 seconds
The microphone is muted.
Two beeps X Error alert tone.
X The ringer volume has reached its lowest setting.
X The listening volume has reached its highest or lowest setting.
X The speaking volume has reached its highest or lowest setting.
X Any key is pressed while the headset is out of range.
Two low beeps Call waiting alert tone.
Two rapid beeps every
20 seconds
Low battery warning.
Three rising beeps A conference call has started.
Three rapid beeps
every 20 seconds
X The headset is out of range.
X The headset is not yet registered.
Three rapid beeps The headset is powering on or o.
Headset alert tones
Screen icons, alert tones, and lights
To Next Page
Loading...
