21
Getting started
The telephone base comes with a mount bracket set for tabletop use. If you
want to mount your telephone on a wall, rotate the mount bracket down so
the telephone can connect with a standard dual-stud telephone wall-mounting
plate. If you do not have this mounting plate, you can purchase one from many
hardware or consumer electronics retailers. You might need a professional to
install the mounting plate.
Tabletop to wall-mount installation
To install the telephone base in the wall-mount position, make sure that you
rst unplug the telephone line cords and power adapter from the telephone
wall jack and power outlet.
1. Pull the integrated wall-mount bracket and release it from the tabletop
orientation, as shown below. Rotate it down into wall-mount position and
then push it into the telephone base until it clicks into place.
Wall-mount
Rear view
Press down on the
tabs of the wall-mount
bracket to release
it from tabletop
orientation.
Installation options
To Next Page
Loading...
