AT&T TL87203 - Chain Dialing

85
Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, caller ID log, or redial list while you are on a call.
Chain dialing can be useful if you wish to access other numbers (such as bank
account numbers or access codes) from the directory, caller ID log or redial list.
Using a cordless handset:
To access the directory while on a call:
1. Press OPTION .
2. Press CID or DIR to highlight Directory, and then press SELECT .
3. Press CID or DIR to highlight the desired directory, and then press
REVIEW .
4. Press CID or DIR to highlight the desired entry or perform an
alphabetical search (page 110).
5. Press DIAL to dial the number shown.
To access the caller ID log while on a call:
1. Press OPTION .
2. Press CID or DIR to highlight Caller ID log, and then press SELECT .
3. Press CID or DIR to highlight the desired number.
4. Press DIAL to dial the number shown.
To access the redial list while on a call:
1. Press REDIAL/PAUSE to show the most recently dialed number.
2. Press CID or DIR to highlight the desired number.
3. Press DIAL to dial the number shown.