AT&T TL87203 - Temporary Tone Dialing; Hold

83
Telephone operation
Options while on calls
Using a cordless headset:
To mute a call:
X Press MUTE/VOICE on the headset to turn o the headset microphone. The
voice prompt “Mute on” plays. The MUTE light on the headset base ashes
and a short beep plays every 30 seconds.
To take a call o mute:
X Press MUTE/VOICE on the headset to resume the two-way conversation.
You hear the voice prompt “Mute o”.
Temporary tone dialing
If you have pulse (rotary) service only, you can switch from pulse to touch-tone
dialing temporarily during a call. This is useful if you need to send touch-tone
signals to access your telephone banking or long distance services.
During a call:
1. Press TONE on the cordless handset or telephone base.
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing aer you end the call.
Hold
You can place a call on hold. You hear an alert tone at the telephone base if you
have not taken the call o of hold aer 14 minutes. You hear another alert tone
at the telephone base 30 seconds later. At 15 minutes on hold, the call on hold
automatically disconnects.
To place a call on line 1 or line 2 on hold:
X Press HOLD on a cordless handset or the telephone base. L1) On hold and/
or L2) On hold appears on the cordless handset and telephone base. ,
, or ashes on the screens of the handset and the telephone base.
To resume a call on line 1 or line 2 on hold:
X Press LINE 1/FLASH or LINE 2/FLASH on a cordless handset, or press 1 LINE
or 2 LINE on the telephone base.
To place a cell call on hold:
X Press HOLD on cordless handset or the telephone base. CL) A On hold,
CL) B On hold, or CL) A&B On hold appears on the handset and telephone
base. A , B, or A B ashes on the screens of the cordless handset and
telephone base.
To resume a cell call on hold:
X Press A CELL or B CELL on the cordless handset, or press CELL A or
CELL B on the telephone base.