AT&T TL87203 - Answer an Incoming Call on Line 1 or Line 2 While on a; Cell Call

74
Telephone operation
Telephone operation
Answer an incoming call on line 1 or line 2 while on a cell call
If you are on a cell call and you receive an incoming call on line 1 or line 2, you
hear a beep, and then , , or , and Incoming call displays on the
handset or telephone base you are using. The telephone base and all other
handsets ring.
To answer the incoming call on line 1 or line 2:
Using a cordless handset:
X Press LINE 1/FLASH or LINE 2/FLASH to answer the incoming call on line
1 or line 2. The cell call is automatically placed on hold. All screens display
CL) A On hold, CL) B On hold, or CL) A&B On hold. At the same time, the
screens will display L1) In use and/or L2) In use.
Using the telephone base:
X Press 1 LINE or 2 LINE to answer the incoming call on line 1 or line 2. The
cell call is automatically placed on hold. All screens display CL) A On hold,
CL) B On hold, or CL) A&B On hold. At the same time, the screens will
display L1) In use and/or L2) In use.
Using the cordless headset:
X Press on the headset.
To end the call on line 1 or line 2:
Using a cordless handset:
X Press OFF/CANCEL on the cordless handset. The cell line is still on hold.
The telephone base and all other cordless handsets display CL) A On hold,
CL) B On hold, or CL) A&B On hold .
Using the telephone base:
X Press 1 LINE or 2 LINE on the telephone base . The cell line is still on hold.
The telephone base and all cordless handsets display either CL) A On hold,
CL) B On hold, or CL) A&B On hold .
Using the cordless headset:
X Press on the headset.
To resume the cell call On hold:
Using a cordless handset:
X Press A CELL or B CELL on the handset.
Using the telephone base:
X Press CELL A or CELL B on the telephone base.
NOTE: If you have turned on your answering system and you do not answer the incoming call
on line 1 or line 2, the call is answered by your answering system.