AT&T TL87203 - Installation of AT&T Softphone Call Manager on Computer; Audio Settings

20
Getting started
Connecting your telephone base to computer
Installation of AT&T Softphone Call Manager on computer
To install AT&T Sophone Call Manager:
1. Put the CD-ROM that comes with the package into your computer. Open
My computer, and then double click to open the disk drive.
-OR-
Visit www.telephones.att.com/downloads to download the soware.
Unzip the le aer download.
2. Double click the installation le to begin the InstallShield Wizard.
X If any security warning window pops up, tick the option check box to
authorize the installation of the soware. Click Run.
3. Select the language to be displayed during the installation and in the
program. Click OK to continue.
4. Click Next>. Read the license agreement, and then accept the terms by
pressing the upper check box. Press Next> to continue.
5. The default installation path is:
“C:\Program Files\AT&T\AT&T Sophone Call Manager v3”.
Click the Browse... button to change the path, if necessary. Click Next>.
6. Select the program to connect to the soware. Click Next>.
7. Click Install.
8. When the installation is complete, press Finish to exit the installation program.
X If you want to launch the AT&T Sophone Call Manager aer
installation, tick the option check box before pressing Finish.
Audio Settings
Aer you have installed the AT&T Sophone Call Manager, check to make sure
the audio setting is properly configured in your Skype and/or Microsoft Lync.
Audio settings in Skype:
1. Launch the Skype program.
2. Click Tools, and then Options.
3. Click Audio settings.
4. Make sure AT&T USB Audio is selected under the speakers and microphone
settings.
Audio settings in Microso Lync:
1. Launch the Microso Lync program.
2. Click Options, and then Audio device.
3. Make sure AT&T USB Audio is selected under the Audio device setting.
IMPORTANT
Periodically check for soware updates. Go to the ABOUT tab under the Settings panel in the
AT&T Sophone Call Manager, and then click Check Update. For more details, refer to the
Soware updates section in the Installation and Operation Guide, available in the
CD-ROM which comes with the package.