AT&T TL87203 - Cell Area Code

61
Telephone settings
CELL AREA CODE
---
BACKSP
SAVE
Cordless handset and telephone base settings
Cell area code
Most cell phone entries are stored in a 10-digit format. If all of your cell phone
entries are stored this way, you do not need to program your cell area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly.
To set the cell area code:
Using a cordless handset:
1. Press MENU in idle mode to enter the main menu.
2. Press CID or DIR to highlight Directory, and then
press SELECT .
3. Press CID or DIR to highlight a desired downloaded
directory, and then press OPTION .
4. Press CID or DIR to highlight Cell area code, and then press SELECT .
The screen briey shows Only for 7 digits dialing from Caller ID log.
5. Use the dialing keys to enter a three-digit home area code.
X Press MUTE/DELETE or BACKSP to erase a digit.
X Press and hold MUTE/DELETE to erase all digits.
X Press CID or DIR to move the cursor to the le or right.
6. Press SAVE to conrm. You hear a conrmation tone and the screen shows
Area code will not be shown in Caller ID log briey before returning to the
previous menu.