87
Telephone operation
Redial
The telephone base and each cordless handset store the last 10 dialed numbers
(up to 30 digits each) in the redial list. The redial entries of each cordless
handset and the telephone base are independent.
Review the redial list
Using a cordless handset:
1. Press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR, or REDIAL/PAUSE
repeatedly
to browse until the desired number displays.
The
handset beeps twice at the end of the list.
Press OFF/CANCEL to exit.
Using the telephone base:
1. Press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR, /RECORD, /DELETE,
or REDIAL/PAUSE
repeatedly to browse until
the desired number displays. The telephone
base beeps twice at the end of the list.
Press CANCEL to exit.
Dial a redial entry
Using a cordless handset:
1. Press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR, or REDIAL/PAUSE
repeatedly to browse until the desired
number displays.
The handset beeps twice at the end of the list.
3. Press LINE 1/FLASH, LINE 2/FLASH, or
/SPEAKER to dial using line 1 or line 2,
or press A CELL or B CELL to dial using the cell line.
-OR-
1. Press LINE 1/FLASH, LINE 2/FLASH, or
/SPEAKER to use line 1 or line 2,
or
press A CELL or B CELL to use the cell line, and then press
REDIAL/PAUSE.
2. Press
CID, DIR, or REDIAL/PAUSE
repeatedly to browse until the desired
number displays.
The handset beeps twice at the end of the list.
X If you are using the cell line, press INSERT to select the
desired number.
3. Press DIAL to dial the number displayed.
To Next Page
Loading...
