88
Telephone operation
Redial
-OR-
You can also insert the area code to the redial number before dialing.
1. Enter the area code in idle mode, and then press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR
, or
REDIAL/PAUSE
repeatedly
to browse until the desired
number displays, and then press
INSERT . The area code
will be added in
front of the selected redial number.
3. Press LINE 1/FLASH, LINE 2/FLASH, or
/SPEAKER to dial using line 1 or line 2,
or press A CELL or B CELL to dial using the cell line.
Using the telephone base:
1. Press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR, /RECORD, or /DELETE
to browse until the desired
number displays. The telephone base beeps twice at the end of the list.
3. Press LINE 1, LINE 2, or SPEAKER
to dial using line 1 or line 2,
or press
Cell A or CELL B to dial using the cell line.
-OR-
1. Press LINE 1, LINE 2, or
SPEAKER
to use line 1 or line 2,
or press
Cell A or CELL B to use the cell line, and then press REDIAL/PAUSE.
2. Press
CID, DIR, /RECORD, /DELETE,
or
REDIAL/PAUSE
repeatedly
to
browse until the desired number displays.
The handset beeps twice at the
end of the list.
X If you are using the cell line, press INSERT to select the desired number.
3. Press DIAL to dial the number displayed.
-OR-
You can also insert the area code to the redial number before dialing.
1. Enter the area code in idle mode, and then press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR, /RECORD, or /DELETE
, or
REDIAL/PAUSE
repeatedly
to browse until the desired number displays, and then press
INSERT . The
area code
will be added in front of the selected redial number.
3. Press LINE 1, LINE 2, or SPEAKER
to dial using line 1 or line 2,
or press
Cell A or CELL B to dial using the cell line.
To Next Page
Loading...
