AT&T TL87203 - Change a One-To-One PTT Call to an Intercom Call; Answer an Incoming Call During; PTT Call

101
Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
Using a cordless handset or the telephone base:
1. When your device shows Press and hold [PTT] to talk, press INTCOM . The
screen shows Switch to Intercom?.
2. Press SELECT . Your device displays Calling BASE or Calling HANDSET X.
The destination device briey shows Push to talk Ended, and then
HANDSET X is calling or BASE is calling. The destination device rings.
3. Press LINE 1/FLASH, LINE 2/FLASH, or any dialing keys (0-9, or TONE )
on the destination handset, or press 1 LINE, 2 LINE, or any dialing keys (0-9,
or TONE ) on the telephone base to answer the intercom call. Both devices
now show Intercom.
4. To end the intercom call, press OFF/CANCEL or END on your cordless
handset, or place the cordless handset in the charger; or press END on the
telephone base. Both screens show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
Using a cordless handset or the telephone base:
X During a one-to-group PTT call, press LINE 1/FLASH, LINE 2/FLASH,
A CELL, or B CELL on the initiating handset, or press LINE 1, LINE2,
CELL A , or CELL B on the telephone base. The PTT call ends
automatically and the outside call is answered.
X During a one-to-group PTT call, press LINE 1/FLASH, LINE 2/FLASH,
A CELL, or B CELL on any one of the destination handsets, or press
1 LINE, 2 LINE, CELL A , or CELL B on the telephone base. That device
answers the outside call. The PTT call continues for the rest of the PTT
participants.
X To leave the PTT call without answering the incoming call, press
OFF/CANCEL on your handset or CANCEL on your telephone base. The
telephone continues to ring.