91
Multiple handset use
Intercom
Use the intercom feature for conversations between a cordless handset and
the telephone base, two cordless handsets, or a cordless handset/telephone
base and a cordless headset/speakerphone (sold separately). You can buy
additional expansion handsets (AT&T model TL86003), cordless headset, and
cordless speakerphones (AT&T model TL80133) for this telephone base to
expand your telephone system (up to 12 handsets or 10 handsets and two
cordless headsets/speakerphones).
To initiate, answer, and end an intercom call:
Using a cordless handset:
1. Press MENU in idle mode to enter the main menu.
Press CID or DIR to highlight Intercom, and then
press SELECT .
X The handset shows INTERCOM TO:. Use the dialing
keys to enter a specific device number (0 for the
telephone base, 1-9 for handsets 1-9, TONE followed
by 0-2 for handsets 10-12, # for a single cordless
headset/speakerphone, # followed by 1 or 2 for
cordless headset/speakerphone 1 or cordless headset/
speakerphone 2, respectively), or press qCID or pDIR
to highlight the desired device and press SELECT . Your
handset screen shows Calling HANDSET X or Calling Base.
The destination device(s) rings and shows HANDSET X is calling (HANDSET
represents the handset name, X represents the handset number).
2. To answer the intercom call, press LINE 1/FLASH, LINE 2/FLASH, /SPEAKER,
A CELL, B CELL, any dialing key (0-9, TONE ), or press ANSWER on the
destination handset. Both devices now show Intercom.
3. To end the intercom call, press END, OFF/CANCEL, or place the cordless
handset into the charger; or press END on the telephone base. The other
party hear four beeps. Both devices display Intercom ended.
INTERCOM TO:
BASE 0
HANDSET 2
BACK
SELECT
Play messages
Directory
Caller ID log
Intercom
BACK
SELECT
To Next Page
Loading...
