13
Getting started
Telephone base and charger installation
Headset charger installation
IMPORTANT INFORMATION:
X Use only the power adapter(s) supplied with this product. To obtain a replacement, visit
our website at www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
X Connect the power adapters in a vertical or oor mount position only. The adapters’ prongs
are not designed to hold the weight of the telephone, so do not connect them to any ceiling,
under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the
outlets.
Plug the small end of the headset charger power adapter into the power jack at
the bottom of the headset charger. Route the power cord through the power
cord slot. Plug the large end of the power adapter into an electrical outlet not
controlled by a wall switch.
Plug the power adapter into an
electrical outlet not controlled by
a wall switch.
Route the power cord
through the slot.
To Next Page
Loading...
