AT&T TL87203 - Page 144

137
Answering system
Message playback
When messages are playing on a cordless handset:
X Press /SPEAKER to play the messages through the handset earpiece.
Press /SPEAKER again to return to playing messages through the
speakerphone.
X Press CID/VOLUME or DIR/VOLUME to adjust the speakerphone
volume.
X Press SKIP to skip to the next message.
X Press REPEAT to repeat the message currently playing. Press REPEAT twice
to listen to the previous message.
X Press MUTE/DELETE to delete the current message.
X Press 2 to pause the playback and show the caller ID information.
X Press LINE 1/FLASH, LINE 2/FLASH, /SPEAKER, or DIAL to use
line 1 or line 2, or press A CELL or B CELL to use a cell line to call
back the caller. If necessary, press
#
(pound key) or 1 to show dierent
dialing options.
X Press OFF/CANCEL or BACK to restart the playback. If you do not call
back within 10 seconds, message playback restarts.
X Press LINE 1/FLASH, LINE 2/FLASH, A CELL, or B CELL to pause
the message playback. The handset displays Call back? with the caller ID
information. If the dialing format used is not correct, press QUIET
#
(pound
key) or 1 to show dierent dialing options. Press DIAL to call back the caller,
or BACK to restart the message playback. If the dialing format used is
not correct, and then use the option, as mentioned above, to choose the
correct format before calling back the caller.
X Press OFF/CANCEL to stop the playback.