AT&T TL87203 - Page 112

105
Directory
Create directory entries
Using the telephone base:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press CID, DIR, /RECORD, or /DELETE to highlight Directory, and
then press SELECT .
3. Press OPTION to choose Home.
4. Press SELECT to choose Add contact. The screen displays ENTER NUMBER.
5. Use the dialing keys to enter a telephone number.
X Press CID or /REPEAT to move the cursor to the le. Press DIR or
/SKIP to move the cursor to the right.
X Press /DELETE or BACKSP to erase a digit.
X Press and hold /DELETE to erase all digits.
X Press and hold REDIAL/PAUSE to enter a dialing pause (a p appears).
-OR-
Copy a number from the redial list. Press REDIAL/PAUSE, and then CID,
DIR, or REDIAL/PAUSE repeatedly to locate the number. Press INSERT to
copy the displayed number.
6. Press NEXT .
7. Press CID, DIR, /RECORD, or /DELETE to highlight one of the
following types:
X Home
X Cell
X Work
X Other
8. Press NEXT . The screen displays ENTER NAME.
9. Use the dialing keys (see page 106) to enter a name (up to 15 characters).
• Press CID or /REPEAT to move the cursor to the le. Press DIR or
/SKIP to move the cursor to the right.
• Press 0 to add a space.
• Press /DELETE or BACKSP to erase a character.
• Press and hold /DELETE to erase all characters.
• Press TONE /a>A to change the next letter to upper or lower case.
10. Press SAVE to conrm and the screen shows Saved. You hear a
conrmation tone.
NOTE: You can also download directory entries from your cell phone (see Download
directory on page 44).