164
Appendix
My cordless handset does not ring when I receive a call.
X Make sure that the ringer is not o. Refer to Ringer volume on page 49
in this user’s manual.
X Make sure you plug in the telephone line cord securely into the telephone
base and the telephone jack. Make sure you plug in the power cord securely.
X The cordless handset may be too far from the telephone base.
X Charge the battery in the cordless handset for at least 10 hours. For
optimum daily performance, return the cordless handset to charger when
not in use.
X You may have too many extension phones on your telephone line to
allow all of them to ring simultaneously. Try unplugging some of the
other phones.
X The layout of your home or oce may be limiting the operating range. Try
moving the telephone base to another location, preferably to a
higher location.
X If other phones in your home are having the same problem, contact your
telephone service provider (charges may apply).
X Test a working phone at the phone jack. If another phone has the same
problem, contact your telephone service provider (charges may apply).
X Other electronic products can cause interference with your cordless phone.
Try installing your phone as far away as possible from electronic devices
such as television sets, VCRs, or other cordless telephones.
X Remove the battery. Install the battery again and place the cordless handset
into charger. Wait for the cordless handset to re-establish its connection with
the telephone base. Allow up to one minute for this to take place.
X Your line cord may be defective. Try installing a new line cord.
I cannot hear a ring tone from the headset when there is an incoming call.
X The headset does not have an external ringer. You can only hear the ring
tone when you are wearing the earpiece.
X If you have pressed MUTE/VOICE on the headset when it is ringing, it mutes
the ring tone of the headset. The ring tone resumes on the next call.
Troubleshooting
To Next Page
Loading...
