AT&T TL87203 - Page 34

27
Getting started
To attach the ear hook to the headset:
1. Make sure there is no headset attachment, except the earbud, connected
to the headset.
2. Insert the earpiece into the ear hook loop.
3. Press the edge of the ear hook loop towards the earpiece until it clicks into
place.
4. Adjust and rotate the ear hook position to t your ear.
X To wear on the le ear:
X To wear on the right ear:
Headset attachments
Over the ear hook
There are three ear hooks provided. Choose the size that best ts your need to
attach to the headset. Follow the steps, as mentioned below, to attach an ear
hook to the headset.
To position the headset to wear on the le or right ear:
1. Make sure the ear hook loop is positioned,
as shown on the right.
2. Attach the ear hook to the headset, as
instructed below.
1. Make sure the ear hook loop is positioned,
as shown on the right.
2. Attach the ear hook to the headset, as
instructed below.
Ear hook loop
1
2
Ear hook loop