• The first PEQ filter can be changed to a High pass filter with the corresponding drop-down menu
(see below).
• The last PEQ filter can be changed to a Low Pass filter with the corresponding drop-down menu
(see below).
• For the low pass and high pass filter, you have access to the following settings: cutoff frequency
and gain.
• By clicking on the Graphic button you will able to adjust the cutoff frequency and the gain directly
by moving the corresponding yellow cursor, see below.
Ateïs International
Ch. du Dévent, 1024 Ecublens, Switzerland.
Phone : +41 21 881 25 10
120
To Next Page
Loading...
