• 2 internal screw connectors for 0 dB audio:
• audio output from PPM microphone --> Audio Output (connect to the Audio In of the
LAP)
• audio input to PPM speaker --> Audio Input (connect to the Audio Output of the LAP,
if needed)
• 1 input for additional 24V power supply. (Depending on distance between LAP and PPM/URC
you will have to put an external powe supplyr)
• 1 internal switch for PPM Master or Slave selection. (Slave features are not available for the
moment)
• 1 internal switch for System or Local power supply selection.
Ateïs International
Ch. du Dévent, 1024 Ecublens, Switzerland.
Phone : +41 21 881 25 10
21
To Next Page
Loading...
