Atrust T180L - Page 215

Conguring Client Settings
Conguring Service Access Settings
205
Options Sub-tab
Window Settings
Item Description
Resolution
Click the drop-down menu to select the desired display size of a View session.
Three options are available: Full Screen, Large Window, and Small Window.
Option Description
Full Screen Opens the selected View session in full screen.
Large Window Opens the selected View session in a large window.
Small Window Opens the selected View session in a small window.
USB Redirection Settings
Item Description
Mass Storage
Please refer to “Advanced Quick Connection Settings for VMware View Sessions”
on page 58 for detailed instructions on these similar settings.
Smart Card
Human Interface Device
Printer
Plugged USB Devices
Redirection Rules
Connection Settings
Item Description
Printer Mapping
Click to enable/disable printer mapping for VMware View connections.
NOTE: You need to add a local or network printer for your t180L/t180LB rst,
and then enable this feature here to use that mapped printer in a virtual
desktop session.
NOTE: For detailed instructions on how to add a local or network printer for your
t180L/t180LB, please refer to section “4.4.7 Adding a Local Printer” on
page 86 or “4.4.8 Adding a Network Printer” on page 89.
NOTE: Even you disable printer mapping, your printer might still be redirected
to a virtual desktop session if Printer Redirection is enabled (see above
settings in this table).