ATV 200 - Section 3 Assembly and Adjustment of Engine; (I) Closing Assembly of Left & Right Crankcase

2.Installment
Spindle assy and driving shaft assy
3.Installment
.Balance shaft
.Fork 1
.Fork 2
.Fork 3
.Shift cam
.Short fork shaft
.Long fork shaft
.Lubricate each gear and bearing.
.Before closing, be sure to set the shift mecha-
nism at neutral and active in operation.
Caution
- 179 -
1.Installment
.Crankshaft
(Install to right crankcase)
Caution:
When installing the crankshaft, fasten the con-
necting rod to the installing hole of cylinder
with hand.
Section 3 Assembly and adjustment of Engine
(I) Closing assembly of left & right crankcase