(II)Inspection steps
1.Check the front shock absorber. If it is leak-
age ,replace it .Check the universal joint.If it is
crack or damaged,replace the front shock
absorber.
Check spring, if it is fatigue or damage, re-
place the front shock absorber.(When
checking,move the spring up and down)
2.Check the front seat assy of front brake, if it
is crack sunk or damaged, replace it.
If the front axle is bend don’t strighten it in
order to avoid reducing the performance of
front axle on the brake.
3.Check the left/right front wheel fork welding,
if it is crack, bent or damaged, replace it.
If the left/right front wheel fork welding is bent,
don’t strighten it seriously in order to avoid re-
ducing its performance.
4.Check the bushing sub-assembly ¢Ù, if it is
worn or damaged, replace it.
Warning
Warning
- 103 -
To Next Page
Loading...
