2.Replacement of fused fuse
Replacement steps:
.Cut off ignition and circuit.
.Install the qualified fuse
.Start the power for electrical appliance
inspection.
.If the fuse fused, inspect the system again
Refer to “Elelctrical Appliance”of Chapter
Four
3.Installment of fuse cover
(III)Replacement of headlight lamp
1.Cut off
.Connecting wire terminal of headlight ¢Ù
2.Remove
.Unit of headlight¢Ú
3.Take out the lens ¢Ù
4.Remove the lens seat ¢Ú
Rotate counterclockwise when taking out the
lens ¢Ù.
Caution:
When removing the light head hold the front
side of the headlight with hand.
5.Remove
.Lamp ¢Ù
The inflammables is not allowed to approach
the lamp which is on, and the lamp is very hot,
never touch it before cooling.
Warning
¢Ù
¢Ú
- 51 -
To Next Page
Loading...
