6.Installment
.Lamp ¢Ù(new)
Be sure that the projective part on the lamp
¢Úis engaged with the concave groove ¢Ûon
the light seat.
Never touch the glass part to avoid the lamp
to touch the fuel. Otherwise, the lamp will be
light permeability, service life and illuminating
value.If there is some oil, clean off with cloth
mixed with alcohol.
7.Connect
.Light seat ¢Ù
Make sure that the projective part on the lamp
is engaged with the concave groove on the
light seat.
8.Install the lens to the light seat.
9.Installment
.Headlight
Install the rubber hole-guard ring of the head-
light connecting wire column to the headlight.
10.Connect
.Connecting wire terminal of headlight.
Caution
Caution
Caution
Caution
- 52 -
To Next Page
Loading...
