6.Inspection
One of parts of O-ring¢Ù , compressure spring,
rough filter ¢Û,fine filter ¢Üis damaged,
repalce it.
7.Cleaning
Clean the compressure spring¢Ú, filter¢Û,filter
¢Ü, filter plug of crankcase¢Ýand filter net cap
with cleaner.
8.Coat the engine oil on the O-ring slightly.
9.Install the fine filter ¢Ù, fine filter cap with
O-ring¢Úrough filter¢Ûand draining plug¢Ü.
Before installing the draining plug, mount O-
ring ¢Ý,compress spring ¢Þand fine filter and
be ensure that their mounting order must be
correct.
Mounting torque :fine filter cap:10N.m
draining plug:40N.m
10.Fill machine oil into crankcase
Refer to : “Inspection of Engine oil Quantity”
Appendix:Total:2.2L
Periodic changing oil :1.8L
Oil quantity when cleaning or replacing filter
net: 1.7L
Warning
- 65 -
To Next Page
Loading...
