Page | 68 of 105
AVR8414 Operation Manual – Rev O
Playback
Playback options can be changed from the Main > Configure > Playback page. The following
options can be set:
• “Disable audio during playback.” If set to Yes, audio will not be decoded or played
during playback. This can improve DVR jogging in playback-while-record (PWR) use-
case scenarios when the DVR is heavily loaded and playback of audio is not required.
• “Preferred video input for playback.” This option sets which video source will be played
back for playback-while-recording when the play button is pressed.
• “TS File Streaming.” If this option is set to Yes, a playback option will appear when
viewing File Details on the OSD page Main > File List > File Details.
Figure 73 - Record Configuration Menu
Figure 74 - Playback Configuration Menu
To Next Page
Loading...
Need help?
General