AVALEX TECHNOLOGIES AVR8414 User Manual

Page | 91 of 105
AVR8414 Operation Manual – Rev O
Avalex AVR8414 Factory Default Settings
Configuration
Option
Feature Explanation
Valid Settings
Selected
User Interface
OSD Cursor
Wrap
Allows the cursor selection in on-
screen menus to be moved from
bottom to top by rotating the
encoder knob clockwise.
Yes, No
No
On-Screen Display Options
Display Format
Sets the HD and SD output
resolution of the DVR. It is
recommended that the output
resolution be set to match the input
resolution. Setting to 25/50 Hz will
result in a PAL composite signal.
Setting 30/60 Hz will result in an
NTSC composite signal.
720p50, 720p60,
1080p25, 1080p30,
1080p50, 1080p60
720p60
Aspect Ratio
Correction
Selects whether the HD-SDI output
of the DVR will stretch 4:3 video to
fill the 16:9 frame (no) or maintain the
4:3 aspect ratio by adding vertical
black bars on either side of 4:3 video
(yes).
Yes, No
No
OSD
Transparency
Selects the percentage of
transparency of the on-screen menu
background. 0 is completely
transparent, 100 is completely
opaque (black).
0 - 100
20
Discrete I/O
Zeroize on
Discrete
Selects a discrete input to command
a SATA secure erase process on
both internal and removable SATA
media.
1, 2, 3 or 0
(disabled)
0
Zeroize Trigger
Selects whether an open or ground
signal will trigger the zeroize action.
Falling (Ground),
Rising (Open)
Rising
Dim on
Discrete
Selects a discrete input to command
the DVR to toggle on Night dimming
mode.
1, 2, 3 or 0
(disabled)
0
Dim Trigger
Selects whether an open or ground
signal will trigger the night dimming
mode.
Falling (Ground),
Rising (Open)
Open
Event Mark on
Discrete
Selects a discrete input to command
an event mark be placed in video.
1, 2, 3 or 0
(disabled)
0
Event Mark
Trigger
Selects whether an open or ground
signal will trigger the event mark.
Falling (Ground),
Rising (Open)
Open

AVALEX TECHNOLOGIES AVR8414 Specifications

General

Brand	AVALEX TECHNOLOGIES
Model	AVR8414
Category	Measuring Instruments
Language	English