Avaya Scopia XT5000 Deployment Guide

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 112.
Procedure
1. To assign a preferred network port, access the network priority settings. From the XT Series
web interface, select Administrator Settings > Networks > Preferences > General. From
the endpoint's main menu, select Configure > Advanced > Networks > Preferences >
General.
Figure 82: Choosing the priority network port
2. Set the Priority setting to the GLAN port that the preferred network uses. When the routing
of a call cannot be determined by matching the destination address with the GLAN address,
it uses the preferred network port.
3. From the web interface only, select Save.
4. To define the MTU size and network speed for each port, access the advanced network
settings. From the XT Series web interface, select Administrator Settings > Networks >
GLAN1/GLAN2 > Parameters. From the endpoint's main menu, select Configure >
Advanced > Networks > GLAN1/GLAN2 > Parameters.
Figure 83: Configuring advanced network connection from the web interface
Configuring Advanced Network Settings
April 2015 Avaya Scopia
®
XT Series Deployment Guide 119
Comments? infodev@avaya.com

Avaya Scopia XT5000 Specifications

General

Brand	Avaya
Model	Scopia XT5000
Category	Conference System
Language	English