Related Links
Configuring Basic Settings with the Quick Setup Wizard on page 83
Configuring Basic Gatekeeper Settings
About this task
Configure the gatekeeper settings if your Avaya Scopia
®
XT Series works with one. A gatekeeper
routes audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP address
of an endpoint, and handles the initial connection of calls. To modify advanced gatekeeper settings,
see
Configuring Advanced Gatekeeper Settings on page 124.
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in Configuring Basic
Settings with the Quick Setup Wizard on page 83, and skip to this step.
Figure 57: Gatekeeper settings
2. Configure the gatekeeper connection as described in the following table.
Field Description
Use Gatekeeper Choose whether this endpoint is registered to a gatekeeper, like
the Avaya Scopia
®
ECS Gatekeeper.
Mode or Automatic IP
Address
Choose whether the gatekeeper is configured to automatically
detect endpoints. For more information, ask your network
administrator.
Gatekeeper IP address Enter the IP address of the gatekeeper.
E.164 Enter the H.323 number required to dial the XT Series.
3. If you are registering your endpoint to a SIP server, select Next and continue with
Configuring Basic SIP Settings on page 90. Otherwise, select Done to complete the Quick
Setup Wizard.
Configuring Basic Settings with the Quick Setup Wizard
April 2015 Avaya Scopia
®
XT Series Deployment Guide 89
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
