Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 112.
Procedure
1. Access call settings. From the XT Series web interface, select Administrator Settings >
Call > Preferences > General. From the endpoint's main menu, select Configure >
Advanced > Calls > Preferences > General.
Figure 90: Setting a time limit for videoconferences
2. For XT Series with an embedded MCU, define the time limit for meetings with multiple
participants in the Meeting Time Limit field.
By default, the time limit is Unlimited. The maximum limit you can set is 24 hours.
3. Define the time limit for point-to-point calls in the Call Time Limit field.
By default, the time limit is Unlimited. The maximum limit you can set is 24 hours.
Related Links
Advanced Configuration of the XT Series on page 112
Configuring Advanced Sound (Audio Output) Settings
About this task
In most cases, the Avaya Scopia
®
XT Series sound output is transparent and works with the default
settings. However, for complex room setups, the XT Series allows you to carefully merge different
Configuring Advanced Sound (Audio Output) Settings
April 2015 Avaya Scopia
®
XT Series Deployment Guide 131
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
