Before you begin
Upload the required certificates to the XT Series, as described in
Generating and Uploading a
Certificate Signing Request for XT Series on page 162.
Procedure
1. From the XT Series web interface, select Administrator Settings > Protocols > SIP. From
the endpoint's main menu, select Configure > Advanced > Protocols > SIP > Advanced.
Figure 122: Enabling TLS
2. Define the following settings:
Table 51: Configuring TLS Settings
Field Description
Transport Outbound Call Select TLS to secure outgoing calls via TLS.
Use TLS Select Yes to enable TLS functionality.
Verify Certificate Select Yes to connect to other devices via TLS
only when the other device has certificates
signed by the same Certificate Authority (CA) as
the XT Series.
No to connect to a device whose certificate has
not been validated.
3. Select Save.
Securing your XT Series
168 Avaya Scopia
®
XT Series Deployment Guide April 2015
Comments? infodev@avaya.com
To Next Page
Loading...
Need help?
General
