Avaya XT Series - Chapter 7: Manually Setting up the XT Series; Activating the XT Series and Its Optional Features

Chapter 7: Manually setting up the XT
Series
After connecting the system hardware and powering it on as described in
Setting Up the XT Series
Hardware on page 52, perform the initial configuration as described in these sections:
Related links
Activating the XT Series and its Optional Features on page 105
Configuring Basic Settings with the Quick Setup Wizard on page 110
Configuring Monitors on page 121
Configuring Cameras on page 126
Configuring Microphones on page 131
Registering the XT Series to a SIP Server on page 133
Activating the XT Series and its Optional Features
About this task
When you are configuring the XT Series for the first time, you must first activate the software and
then, secondly, configure the XT Series using either the auto-provisioning (cloud) method or the
local (manual) method.
You need license keys to activate the XT Series for the first time, and to enable certain features
(like increased bandwidth or resolution). The available licenses depend on the model of your XT
Series, as described in XT Series software options.
You first generate the license keys in the
Avaya Product Licensing and Delivery System (see
Getting Started with Avaya PLDS). Once you have the license keys, you activate the XT Series
and any optional features you purchased, as described below the table. You can do this from the
endpoint itself or from its web interface.
Important:
Without a license key to activate the product, you can only use the system in preview mode
for 30 days (effective power on time, not calendar days).
August 2020 Deployment Guide for Avaya XT Series 105
Comments on this document? infodev@avaya.com