Avaya XT Series - Pairing an XT Remote Control Unit

Keyboard Simplified Remote
Control
Advanced Remote
Control
Notes/Tips
End Hold Near/Far (Inputs) Inputs Use to switch rapidly
between local and
remote cameras.
Page Up Zoom+ Zoom+
Page Down Zoom - Zoom -
Arrow Up Arrow Up Arrow Up
Arrow Down Arrow Down Arrow Down
Arrow Left Arrow Left Arrow Left
Arrow Right Arrow Right Arrow Right
Mute (Ext. Keyboard) Mute Mute Press and hold the Mute
key to toggle privacy.
Volume+ (Ext.
Keyboard)
Volume+ Volume+
Volume- (Ext. Keyboard) Volume- Volume-
Related links
Controlling the XT Series on page 137
Pairing an XT Remote Control Unit on page 143
Pairing an XT Remote Control Unit
About this task
If you have multiple XT Series units in the same room, you can pair a XT Remote Control Unit with
its XT Codec Unit so that every unit has its dedicated remote, so when you press a key on a
remote, it triggers an action on the correct XT Series unit. Enter the same numeric code in both
the XT Series and its XT Remote Control Unit to pair them. By default all remotes and endpoints
use the same code 01.
Procedure
1. Access the general settings. From the XT Series web interface, select Basic Settings >
Preferences > General. From the endpoint's main menu, select Configure > General.
About the XT Remote Control Unit
August 2020 Deployment Guide for Avaya XT Series 143
Comments on this document? infodev@avaya.com