Avaya XT Series - Chapter 9: Advanced Configuration of the XT Series; Enabling Advanced Maintenance on the XT Series

Chapter 9: Advanced Configuration of the
XT Series
While the Quick Setup Wizard and some other settings enable you to deploy the Avaya Room
System XT Series in your organization, it has a significant array of advanced features which enable
powerful customization.
Enabling Advanced Maintenance on the XT Series
About this task
To perform advanced configuration and maintenance from the endpoint itself, like upgrading the
firmware, you must first enable access to the advanced settings.
Before you begin
Ensure that you have the password to access the Advanced settings. The default password is
1234.
Procedure
1. Access basic settings. From the XT Series web interface, select Basic Settings >
Preferences > General. From the endpoint's main menu, select Configure > General.
2. Set Show Advanced Settings to Yes.
3. From the XT Series web interface, select Administrator Settings. From the endpoint,
press Back
and then select Advanced.
4. Enter the password to display the Advanced screen. The default password is 1234.
5. We recommend changing the default administrator password, as described in Setting PIN
Codes for the XT Series on page 231.
August 2020 Deployment Guide for Avaya XT Series 151
Comments on this document? infodev@avaya.com