Accessing XT Series Web Interface
About this task
This procedure describes how to access the Avaya Room System XT Series web interface, which
supports the following internet browsers:
• Internet Explorer version 8 or later
• Google Chrome version 11 or later
• Mozilla Firefox version 3.6 or later
• Apple Safari version 5 or later
• Opera version 11 or later
• Microsoft Edge 38 or later (EdgeHTML v14)
If you have a monitor, you can find the IP address at the top bar of the endpoint's monitor.
Before you begin
Web access is enabled by default. If it was disabled, you can enable it and configure the security
details as described in
Securing Web Access to the XT Series on page 232.
Procedure
1. Open any of the supported internet browsers and access the XT Series login page by
entering the system's IP address, like http://1.2.3.4/.
Figure 70: Logging into the XT Series web interface
2. Enter the username and password.
The default username for the web interface is Admin with the password 1234.
Important:
We recommend changing the default credentials after logging in for the first time, as
described in the
Securing Web Access to the XT Series on page 232.
3. (Optional) Select the web interface language from the Language list.
4. Select Login.
Related links
Controlling the XT Series on page 137
Accessing XT Series Web Interface
August 2020 Deployment Guide for Avaya XT Series 147
Comments on this document? infodev@avaya.com
To Next Page
Loading...
