Checking Monitor Image
Condition
If you suspect that the monitor display aspect ratio and color renderings may not be optimized,
you can run a test. You can use the test image to finely tune monitor colors and aspect ratio using
the remote control of the monitor provided by the vendor, according to the monitor available
options.
Solution
1. Navigate to Configure > System Status > Diagnostics > I/O Connections > Monitor >
Tests.
2. Click Play to display a test image.
The XT Series displays a synthetic pattern image. The image is visible only when the
selected camera input is HD1.
Figure 137: Synthetic Pattern Image
Related links
Troubleshooting the Avaya Room System XT Series on page 254
Improving Call Video Resolution
Problem
My call does not perform at the resolution I expected.
Remote system resolution limits
Solution
Make sure the remote system also supports your desired resolution. Remote systems that are
limited to 720p or less negotiate lower resolutions with the Avaya Room System XT Series.
VISCA cable
Solution
Make sure the VISCA cable is properly connected to the IN RS-232C port of the camera.
Checking Monitor Image
August 2020 Deployment Guide for Avaya XT Series 269
Comments on this document? infodev@avaya.com
To Next Page
Loading...
